|
|
|
National Stock Number:
3040-01-185-0710
Federal Supply Class:
3040
National Item Identification Number:
011850710
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7840 INCHES MINIMUM AND 0.7843 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487H-11 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OVERALL LENGTH | 7.160 INCHES MINIMUM AND 7.220 INCHES MAXIMUM | | SPECIAL FEATURES | BORE THRU SHAFT LENGTH 0.5925 IN. FIRST END,0.5875 IN. SECOND END NOM DIA; 0.241 IN. THK FLANGE 2.16 - 2.17 IN.OD 2 IN. FROM SECOND END; 0.875-20UNJEF-3A THD ON 0.795 IN. DIA SHAFT 3.08 IN.FROM FIRST END; USED TO POWER PUMP IMPELLER | | SECOND END PITCH DIAMETER | 0.8333 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.6800 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.8725 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.7645 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 20 | | SECOND END STYLE | SPLINED (INVOLUTE) |
|
|