|
|
|
National Stock Number:
3040-01-184-4326
Federal Supply Class:
3040
National Item Identification Number:
011844326
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 9D1139 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 1.2270 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 1.1875 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.750 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.2270 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.0880 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 19 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.227 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 4.380 INCHES NOMINAL | | STEP QUANTITY | 3 |
|
|