|
|
|
National Stock Number:
3040-01-119-0606
Federal Supply Class:
3040
National Item Identification Number:
011190606
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10106787 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 3167427 | 99193 | HONEYWELL INTERNATIONAL INC. | | 3167427-2 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3167427-2 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.910 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 2.570 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.2950 INCHES NOMINAL | | FIRST END DIAMETER | 0.4055 INCHES NOMINAL | | FIRST END STYLE | CROSS DRILLED AND CIRCULAR GROOVED | | FIRST END GROOVE WIDTH | 1.4800 INCHES NOMINAL | | FIRST END HOLE DEPTH | 0.190 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1350 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.405 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 7.330 INCHES NOMINAL | | MATERIAL | STEEL COMP 17-4PH | | SECOND END DISTANCE FROM END TO GROOVE | 1.225 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.1370 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1000 INCHES NOMINAL | | SECOND END DIAMETER | 0.2485 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND SLOTTED | | SECOND END SLOT DEPTH | 0.040 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.032 INCHES NOMINAL | | STEP QUANTITY | 3 | | SPECIAL FEATURES | SECOND END HAS AN UNTHD CROSS DRILLED THRU HOLE 0.0795 IN. DIA 0.280 IN. DISTANCE FROM HOLE C TO END | | SURFACE FINISH | 32.0 MICROINCHES |
|
|