|
|
|
National Stock Number:
3040-01-119-0601
Federal Supply Class:
3040
National Item Identification Number:
011190601
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 01-011103 | 81982 | HYDRO-AIRE AEROSPACE CORP | | 10106785 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1980 INCHES NOMINAL | | FIRST END SLOT DEPTH | 0.055 INCHES NOMINAL | | FIRST END SLOT WIDTH | 0.047 INCHES NOMINAL | | FIRST END STYLE | SLOTTED | | LARGEST STEP DIAMETER | 0.198 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | OVERALL LENGTH | 2.580 INCHES NOMINAL | | SECOND END DIAMETER | 0.1560 INCHES NOMINAL | | SECOND END SLOT DEPTH | 0.725 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.023 INCHES NOMINAL | | SECOND END STYLE | SLOTTED | | SPECIAL FEATURES | FIRST END HAS THD CROSS DRILLED THRU HOLE 0.160 IN. DISTANCE FROM HOLE C TO END;FIRST END BORED 0.050 IN. DIA 0.240 IN. DP,COUNTERBORED 0.109 IN. DIA 0.090 IN. DP;FIRST END HAS TWO CAM LOBES EA 0.070 IN. W,EA CAM LOBE HAS A THD CROSS DRILLED THRU HOLE 0.300 IN. DISTANCE FROM THD HOLE C TO END 0.135 IN. DISTANCE BTWN THD HOLE C | | STEP QUANTITY | 12 | | SURFACE FINISH | 8.0 MICROINCHES |
|
|