|
|
|
National Stock Number:
3040-01-113-8333
Federal Supply Class:
3040
National Item Identification Number:
011138333
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 12293313 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 12293313 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3700 INCHES NOMINAL | | FIRST END SLOT DEPTH | 0.190 INCHES MINIMUM AND 0.195 INCHES MAXIMUM | | FIRST END SLOT WIDTH | 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | FIRST END STYLE | SLOTTED | | LARGEST STEP DIAMETER | 0.3700 INCHES NOMINAL | | OVERALL LENGTH | 1.190 INCHES NOMINAL | | MATERIAL | STEEL COMP 17-4PH | | SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL | | SECOND END HOLE DEPTH | 0.080 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0600 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM | | SECOND END DIAMETER | 0.2460 INCHES MINIMUM AND 0.2480 INCHES MAXIMUM | | SECOND END DISTANCE BETWEEN HOLE CENTERS | 0.0001 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.203 INCHES NOMINAL | | SECOND END STYLE | TWO CROSS DRILLED HOLES | | SPECIAL FEATURES | FIRSTEND HOLE 0.188 DIA 0.122 DEEP AND SECOND END HOLES CSK 100 DEG | | STEP QUANTITY | 6 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|