|
|
|
National Stock Number:
3040-01-113-6875
Federal Supply Class:
3040
National Item Identification Number:
011136875
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 856361 | 49956 | RAYTHEON COMPANY | | 856361-1 | 3B150 | RAYTHEON COMPANY | | 856361-1 | 49956 | RAYTHEON COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.402 INCHES MINIMUM AND 0.405 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.3500 INCHES MINIMUM AND 0.3540 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM | | FIRST END DIAMETER | 0.3745 INCHES MINIMUM AND 0.3747 INCHES MAXIMUM | | FIRST END SLOT DEPTH | 0.090 INCHES NOMINAL | | FIRST END SLOT WIDTH | 0.060 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED AND SLOTTED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | OVERALL LENGTH | 1.940 INCHES NOMINAL | | SECOND END DIAMETER | 0.3745 INCHES MINIMUM AND 0.3747 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.3500 INCHES MINIMUM AND 0.3540 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.408 INCHES MINIMUM AND 0.411 INCHES MAXIMUM | | SECOND END SLOT DEPTH | 0.090 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.060 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND SLOTTED | | SURFACE FINISH | 8.0 MICROINCHES |
|
|