|
|
|
National Stock Number:
3040-01-112-0933
Federal Supply Class:
3040
National Item Identification Number:
011120933
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 13216E6142 | 97403 | CECOM LR CENTER | | 13216E6142-2 | 97403 | CECOM LR CENTER |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.9900 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM | | FIRST END HOLE DEPTH | 0.1875 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.5000 INCHES NOMINAL | | FIRST END FLAT LENGTH | 0.750 INCHES NOMINAL | | FIRST END STYLE | THREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | OVERALL LENGTH | 5.280 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISIB1113 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1113 | | SECOND END DIAMETER | 0.4995 INCHES MINIMUM AND 0.4998 INCHES MAXIMUM | | SECOND END FLAT DEPTH | 0.1198 INCHES NOMINAL | | SECOND END FLAT LENGTH | 0.7500 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.4550 INCHES MINIMUM AND 0.4750 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0900 INCHES NOMINAL | | SECOND END INTERNAL THREAD LENGTH | 0.062 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.9100 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND FLATTED | | STEP QUANTITY | 2 |
|
|