|
|
|
National Stock Number:
3040-01-107-6786
Federal Supply Class:
3040
National Item Identification Number:
011076786
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10106754 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 74A450613-2005 | 13002 | GOODRICH CORPORATION | | 74A450613-2005 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 74A450613-2005 | 1935A | ISRAEL AEROSPACE INDUSTRIES LTD. SHL - AERO ASSEMBLIES DIVISION | | 74A450613-2005 | 2M490 | NASSAU TOOL WORKS, INC | | 74A450613-2005 | 2U518 | BLAIR INDUSTRIES INC | | 74A450613-2005 | 32168 | ALL TOOLS INC. DBA E2 PRECISION PRODUCTS | | 74A450613-2005 | 35962 | SAFRAN LANDING SYSTEMS CANADA INC | | 74A450613-2005 | 36164 | HEROUX-DEVTEK INC. | | 74A450613-2005 | 3Z260 | A. J. ASSOCIATES MANUFACTURING & ENGINEERING CO. INC. | | 74A450613-2005 | 50601 | CIRCOR AEROSPACE, INC. | | 74A450613-2005 | 76301 | THE BOEING COMPANY | | 74A450613-2005 | 85941 | MAGELLAN AEROSPACE, NEW YORK, INC. | | 74A450613-2005 | 9K006 | CIRCOR AEROSPACE, INC. | | 74A450613-2005 | S5495 | ISRAEL AEROSPACE INDUSTRIES LTD. SHL - AERO ASSEMBLIES DIVISION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5300 INCHES MINIMUM AND 0.5400 INCHES MAXIMUM | | FIRST END STYLE | INTERNAL THREADED | | FIRST END INTERNAL THREAD LENGTH | 0.2500 INCHES NOMINAL | | LARGEST STEP DIAMETER | 1.620 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,COMPOSITION 7075-T73 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | OVERALL LENGTH | 29.312 INCHES NOMINAL | | SECOND END DIAMETER | 0.5000 INCHES MINIMUM | | SECOND END HOLE DEPTH | 0.500 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1094 INCHES MINIMUM AND 0.1144 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.190 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.735 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | STEP QUANTITY | 10 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|