|
|
|
National Stock Number:
3040-01-107-6161
Federal Supply Class:
3040
National Item Identification Number:
011076161
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5428064 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | EXTERNAL KEYWAY LENGTH | 0.502 INCHES NOMINAL SECOND END | | EXTERNAL KEYWAY LENGTH | 0.750 INCHES NOMINAL FIRST END | | FIRST END DIAMETER | 0.6240 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM | | FIRST END STYLE | FLAT KEYWAY | | FIRST END KEYWAY DEPTH | 0.104 INCHES MINIMUM AND 0.109 INCHES MAXIMUM | | FIRST END KEYWAY WIDTH | 0.1863 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM | | LARGEST STEP DIAMETER | 0.872 INCHES MINIMUM AND 0.878 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SPEC AMS 5629 FED SPEC 1ST MATERIAL RESPONSE OR PH13-8 MO. ASSN STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP XM-13 | | OVERALL LENGTH | 10.055 INCHES MINIMUM AND 10.115 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.2700 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1240 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM | | SECOND END KEYWAY WIDTH | 0.1240 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM | | SECOND END DIAMETER | 0.6240 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.725 INCHES NOMINAL | | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 1.105 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.725 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED WOODRUFF KEYWAY AND EXTERNALLY THREADED | | STEP QUANTITY | 3 |
|
|