|
|
|
National Stock Number:
3040-01-106-4048
Federal Supply Class:
3040
National Item Identification Number:
011064048
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 6835558 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.0625 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.9375 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 32 | | FIRST END STYLE | SPLINED (INVOLUTE) | | FIRST END PITCH DIAMETER | 2.0000 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 1.078 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 2.0625 INCHES NOMINAL | | LARGEST STEP DIAMETER | 2.450 INCHES NOMINAL | | MATERIAL | STEEL | | OVERALL LENGTH | 7.250 INCHES NOMINAL | | SPECIAL FEATURES | BORE THROUGH SHAFT;EACH END IS SPLINED WITH A BUSHING | | SECOND END DIAMETER | 2.4500 INCHES NOMINAL | | SECOND END PITCH DIAMETER | 2.2500 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 1.688 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 2.4500 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 2.0500 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 24 | | SECOND END STYLE | SPLINED (INVOLUTE) | | STEP QUANTITY | 5 |
|
|