|
|
|
National Stock Number:
3040-01-103-6009
Federal Supply Class:
3040
National Item Identification Number:
011036009
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 12256689 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| BORE DIAMETER | 1.000 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | BORE LENGTH | 1.810 INCHES NOMINAL | | BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 4.280 INCHES NOMINAL | | FEATURES PROVIDED | KEYWAY | | KEYWAY LENGTH | 1.810 INCHES NOMINAL | | KEYWAY WIDTH | 0.189 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.312 INCHES MINIMUM AND 0.314 INCHES MAXIMUM | | LINK END THICKNESS | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-I-666, GRADE 1 FED SPEC 1ST MATERIAL RESPONSE OR QQ-I-666, GRADE 2 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | IRON | | SHAFT END THICKNESS | 1.810 INCHES NOMINAL | | SHAFT SECURING METHOD | KEYWAY | | SPECIAL FEATURES | SLOT IN LINK,0.281 IN. W,0.687 IN. LG;HOLE IN END OF LINK ANGLED 18.500DEG; OFFSET HEIGHT: 1.250 IN. NOMINAL | | STYLE DESIGNATOR | OFFSET, ONE HOLE LINK END, CLAMP TYPE SHAFT END | | SURFACE TREATMENT | PHOSPHATE AND PAINT |
|
|