|
|
|
National Stock Number:
3040-01-102-6264
Federal Supply Class:
3040
National Item Identification Number:
011026264
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 124P465-3 | 78022 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.680 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.191 INCHES MINIMUM AND 0.195 INCHES MAXIMUM | | LINK END THICKNESS | 0.200 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5, T4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | SHAFT END THICKNESS | 1.670 INCHES NOMINAL | | SPLINE QUANTITY | 16 | | SPECIAL FEATURES | SHAFT END 0.80 IN. WIDE,0.86 IN.HIGH; SHAFT HOLE INTERNAL INVOLUTE SPLINE,0.3333 PITCH DIA,45 DEG PRESSURE ANGLE,MATES W/124P478 & 85-7 ENGINE; 2 HOLES THRU SIDE OF SHAFT END 0.203 IN. NOM DIA,DISTANCE CEN HOLE TO BASE 0.20 IN.,CEN TO CEN 1.05 IN; NHA 124P463; PART OF FUEL CONTROL - THROTTLE ACTUATOR OPERATION |
|
|