|
|
|
National Stock Number:
3040-01-098-2599
Federal Supply Class:
3040
National Item Identification Number:
010982599
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 791-0033 | 13499 | ROCKWELL COLLINS, INC. | | 791-0033-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AMDL AND AAHW AND AAHX AND AMFZ | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1887 INCHES MINIMUM AND 0.1892 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.237 INCHES MINIMUM AND 0.249 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303,CONDTN A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | OVERALL LENGTH | 2.546 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.078 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 32.000 INCHES NOMINAL | | SECOND END DIAMETER | 0.1887 INCHES MINIMUM AND 0.1892 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | SECOND END GROOVE DIAMETER | 0.0740 INCHES MINIMUM AND 0.0760 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0180 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM | | STEP QUANTITY | 3 |
|
|