|
|
|
National Stock Number:
3040-01-096-4578
Federal Supply Class:
3040
National Item Identification Number:
010964578
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1709857 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | 729521 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END GROOVE DIAMETER | 1.0830 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0420 INCHES NOMINAL | | FIRST END DIAMETER | 1.1250 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.030 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 1.688 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QC13.01-03,CLASS 4 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OVERALL LENGTH | 4.396 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 1.1450 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.6250 INCHES NOMINAL | | SECOND END DIAMETER | 1.1450 INCHES NOMINAL | | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.563 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.952 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 0.703 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.0703 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.0690 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 24 | | SECOND END STYLE | TWO CIRCULAR GROOVES AND SPLINED (STRAIGHT_) | | STEP QUANTITY | 3 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|