|
|
|
National Stock Number:
3040-01-096-1620
Federal Supply Class:
3040
National Item Identification Number:
010961620
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 8-52-430 | 32386 | ILLINOIS TOOL WKS INC LINAC DIV | | 8-52-430 | 9U023 | ITW HEARTLAND COMPONENTS INC | | 8-52B-26 | 32386 | ILLINOIS TOOL WKS INC LINAC DIV | | 8-52B-26-2 | 32386 | ILLINOIS TOOL WKS INC LINAC DIV | | 8-52B-26-2 | 9U023 | ITW HEARTLAND COMPONENTS INC | | 8-52T-06 ITEM 7 | 9U023 | ITW HEARTLAND COMPONENTS INC | | PL-8-52T-06ITEM7 | 32386 | ILLINOIS TOOL WKS INC LINAC DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | EXTERNAL KEYWAY LENGTH | 1.000 INCHES NOMINAL SECOND END | | FIRST END DIAMETER | 1.9000 INCHES NOMINAL | | FIRST END STEP LENGTH | 2.540 INCHES NOMINAL | | FIRST END STYLE | HEXAGONAL | | FIRST END WIDTH ACROSS FLATS | 1.720 INCHES MINIMUM AND 1.730 INCHES MAXIMUM | | LARGEST STEP DIAMETER | 1.900 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-764,CLASS 304,COND A FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-766,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-766,CLASS 304,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | OVERALL LENGTH | 6.280 INCHES NOMINAL | | SPECIAL FEATURES | BORE LG OF SHAFT 0.490 IN. NOM DIA | | SECOND END GROOVE DIAMETER | 1.4050 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0580 INCHES NOMINAL | | SECOND END KEYWAY WIDTH | 0.2500 INCHES NOMINAL | | SECOND END DIAMETER | 1.4990 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.192 INCHES NOMINAL | | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 1.240 INCHES NOMINAL | | SECOND END STYLE | WOODRUFF KEYWAY AND CIRCULAR GROOVED | | STEP QUANTITY | 2 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|