5365-00-925-3235 RING,RETAINING,INSTRUMENT Index 3110-00-925-3237 RETAINER,ROLLER,BEARING

National Stock Number:
3040-00-925-3236

Federal Supply Class:
3040

National Item Identification Number:
009253236

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.


Manufacturer Information:
69579899167HAMILTON SUNDSTRAND CORPORATION


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END DISTANCE FROM END TO GROOVE0.101 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
FIRST END DIAMETER1.3540 INCHES MINIMUM AND 1.3560 INCHES MAXIMUM
FIRST END GROOVE DIAMETER1.1460 INCHES MINIMUM AND 1.1480 INCHES MAXIMUM
FIRST END GROOVE WIDTH0.1830 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM
FIRST END STYLECIRCULAR GROOVED
LARGEST STEP DIAMETER1.354 INCHES MINIMUM AND 1.356 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6260 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH1.450 INCHES MINIMUM AND 1.456 INCHES MAXIMUM
SECOND END DIAMETER1.2620 INCHES MINIMUM AND 1.2670 INCHES MAXIMUM
SECOND END STYLESPLINED (INVOLUTE)
SECOND END PITCH DIAMETER1.2000 INCHES NOMINAL
SECOND END PRESSURE ANGLE30.0000 DEGREES NOMINAL
SECOND END SPLINE LENGTH1.048 INCHES MINIMUM AND 1.058 INCHES MAXIMUM
SECOND END SPLINE MAJOR DIAMETER1.2620 INCHES MINIMUM AND 1.2670 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER1.0700 INCHES MINIMUM AND 1.0900 INCHES MAXIMUM
SECOND END SPLINE QUANTITY24
STEP QUANTITY2
SURFACE FINISH32.0 MICROINCHES


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us