3040-00-913-0549, SHAFT,SHOULDERED

5915-00-913-0548 FILTER,RADIO FREQUENCY INTERFERE

National Stock Number:
3040-00-913-0549

Federal Supply Class:
3040

National Item Identification Number:
009130549

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Manufacturer Information:

3151288	59364	HONEYWELL INTERNATIONAL INC.
3151288	77068	ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV

Techincal Specification:

END SIMILARITY	NOT IDENTICAL
EXTERNAL KEYWAY LENGTH	0.500 INCHES NOMINAL FIRST END
EXTERNAL KEYWAY LENGTH	0.945 INCHES MINIMUM AND 0.958 INCHES MAXIMUM SECOND END
FIRST END DISTANCE FROM KEYWAY CENTER TO END	0.320 INCHES NOMINAL
FIRST END DIAMETER	0.4985 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM
FIRST END STYLE	WOODRUFF KEYWAY
FIRST END KEYWAY WIDTH	0.0928 INCHES MINIMUM AND 0.0943 INCHES MAXIMUM
LARGEST STEP DIAMETER	0.562 INCHES NOMINAL
OVERALL LENGTH	5.080 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 440C
SPECIAL FEATURES	ANGLE BETWEEN KEYWAYS 180 DEG
SECOND END DISTANCE FROM END TO GROOVE	0.070 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
SECOND END DISTANCE FROM HOLE CENTER TO END	0.465 INCHES MINIMUM AND 0.475 INCHES MAXIMUM
SECOND END GROOVE DIAMETER	0.4170 INCHES MINIMUM AND 0.4270 INCHES MAXIMUM
SECOND END GROOVE WIDTH	0.0300 INCHES MINIMUM AND 0.0330 INCHES MAXIMUM
SECOND END DIAMETER	0.4980 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM
SECOND END STYLE	CIRCULAR GROOVED AND FLAT KEYWAY
SECOND END HOLE DIAMETER	0.1270 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM
SECOND END KEYWAY DEPTH	0.072 INCHES MINIMUM AND 0.081 INCHES MAXIMUM
SECOND END KEYWAY WIDTH	0.1270 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM
STEP QUANTITY	5

Click here to Register for Free 30-day Trial