|
|
|
National Stock Number:
3040-00-905-6534
Federal Supply Class:
3040
National Item Identification Number:
009056534
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3152644 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3152644 | 77068 | ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 1.396 INCHES NOMINAL | | FIRST END DIAMETER | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | FIRST END HOLE DIAMETER | 0.0940 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM | | FSC APPLICATION DATA | SONAR SET | | LARGEST STEP DIAMETER | 0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM | | OVERALL LENGTH | 4.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 416 | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL | | SECOND END DIAMETER | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 0.2500 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.2063 INCHES MINIMUM | | SECOND END SPLINE QUANTITY | 11 | | SECOND END STYLE | CROSS DRILLED HOLE AND SPLINED (STRAIGHT) | | SECOND END HOLE DIAMETER | 0.0940 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM | | SECOND END SPLINE LENGTH | 0.280 INCHES NOMINAL | | SPECIAL FEATURES | INVOLUTE SPLINE 1.094 IN. FROM 2ND END | | STEP QUANTITY | 3 | | SURFACE FINISH | 62.0 MICROINCHES |
|
|