|
|
|
National Stock Number:
3040-00-879-4416
Federal Supply Class:
3040
National Item Identification Number:
008794416
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 701596 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | BORE DIAMETER | 0.1910 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM | | HOLE DIAMETER AND LOCATION | 0.0470 INCHES NOMINAL 1ST HOLE AND 0.0616 INCHES NOMINAL 2ND HOLE | | OUTSIDE DIAMETER | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD 1ST MATERIAL RESPONSE OR AISI 1010 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE AND FED STD 66 FED STD 2ND MATERIAL RESPONSE OR AISI 1020 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1020 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1020 | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED 1ST HOLE AND UNTHREADED 2ND HOLE | | STYLE DESIGNATOR | PLAIN ROUND | | THICKNESS | 0.131 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
|
|