|
|
|
National Stock Number:
3040-00-698-1735
Federal Supply Class:
3040
National Item Identification Number:
006981735
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 193644 | 56232 | LOCKHEED MARTIN CORPORATION | | 325307PC4 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | STEEL COMP 202 OR | | STEEL COMP 302 OR | | STEEL COMP 303 OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 309 OR | | STEEL COMP 310 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 322 OR | | STEEL COMP 324 OR | | STEEL COMP 347 OR | | STEEL COMP 633 OR | | STEEL COMP 634 OR | | STEEL COMP 403 OR | | STEEL COMP 405 OR | | STEEL COMP 410 OR | | STEEL COMP 414 OR | | STEEL COMP 416 OR | | STEEL COMP 416SE OR | | STEEL COMP 420 OR | | STEEL COMP 430 OR | | STEEL COMP 430F OR | | STEEL COMP 430FSE OR | | STEEL COMP 431 OR | | STEEL COMP 440A OR | | STEEL COMP 440B OR | | STEEL COMP 440C OR | | STEEL COMP 440F OR | | STEEL COMP 440FSE OR | | STEEL COMP 446 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE | | STYLE DESIGNATOR | PLAIN ROUND | | OUTSIDE DIAMETER | 0.500 INCHES NOMINAL | | THICKNESS | 0.156 INCHES MINIMUM AND | | 0.178 INCHES MAXIMUM | | BORE DIAMETER | 0.3125 INCHES MINIMUM AND | | 0.3131 INCHES MAXIMUM | | SECURING HOLE QUANTITY | 1 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED SINGLE HOLE | | HOLE DIAMETER AND LOCATION | 0.0520 INCHES NOMINAL SINGLE HOLE |
|
|