|
|
|
National Stock Number:
3040-00-626-1743
Federal Supply Class:
3040
National Item Identification Number:
006261743
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 8421620 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 6061 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8, ALLOY 6061, 0 FED SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | ANODIZE | | STYLE DESIGNATOR | ROUND W/SINGLE LOBE | | OUTSIDE DIAMETER | 1.625 INCHES NOMINAL | | THICKNESS | 0.625 INCHES NOMINAL | | BORE DIAMETER | 1.2500 INCHES NOMINAL | | DISTANCE FROM BORE CENTERLINE TO END | 1.625 INCHES NOMINAL | | SURFACE FINISH AND LOCATION | 125 MICROINCHES BOTH BEARING FLATS | | 125 MICROINCHES INSIDE PERIPHERY | | SECURING HOLE QUANTITY | 4 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | SECURING HOLE TYPE AND LOCATION | THREADED-COUNTERBORED ALL HOLES | | COUNTERBORE DIAMETER AND LOCATION | 0.0310 INCHES MINIMUM ALL HOLES AND | | 0.3120 INCHES MAXIMUM ALL HOLES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19204 | | DESIGN CONTROL REFERENCE | 8421620 |
|
|