|
|
|
National Stock Number:
3040-00-618-6549
Federal Supply Class:
3040
National Item Identification Number:
006186549
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 8529598 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | BORE DIAMETER | 0.2500 INCHES MINIMUM AND 0.2540 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637, COMP B1113 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1213 | | NOMINAL THREAD SIZE | 0.164 INCHES ALL HOLES | | OUTSIDE DIAMETER | 1.500 INCHES NOMINAL | | OVERALL LENGTH | 1.000 INCHES NOMINAL | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | ALL HOLES UNIFIED NATIONAL COARSE (UNC) | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED ALL HOLES | | SMALL END DIAMETER | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | STYLE DESIGNATOR | ROUND STEPPED | | SURFACE FINISH | 125 MICROINCHES SMALLEST OUTSIDE PERIPHERY | | SURFACE FINISH | 125 MICROINCHES BOTH BEARING FLATS | | SURFACE FINISH | 125 MICROINCHES INSIDE PERIPHERY | | SURFACE TREATMENT | CADMIUM | | THICKNESS | 0.687 INCHES NOMINAL |
|
|