|
|
|
National Stock Number:
3040-00-423-5144
Federal Supply Class:
3040
National Item Identification Number:
004235144
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 83628S4105-565729PC17 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | G6523 | 77260 | PIERCE CO INC THE SUB OF AVIS INDUSTRIAL CORP | | NP11229PC17 | 55509 | COOPER CAMERON CORP AJAX-SUPERIOR DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.344 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 1.078 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.3594 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0650 INCHES NOMINAL | | FIRST END DIAMETER | 0.4370 INCHES NOMINAL | | FIRST END STYLE | CROSS DRILLED AND CIRCULAR GROOVED | | FIRST END HOLE DEPTH | 0.280 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1570 INCHES NOMINAL | | MATERIAL | STEEL | | OVERALL LENGTH | 3.312 INCHES NOMINAL | | SECOND END DIAMETER | 0.4370 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.3594 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0650 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.280 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1500 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.969 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED | | SPECIAL FEATURES | NO. 10-32 NF 2B THREADED HOLES AND SQUARED GROOVE 0.940 IN. LG BY 0.155 IN. DEEP ON FIRST END |
|
|