|
|
|
National Stock Number:
3040-00-406-5035
Federal Supply Class:
3040
National Item Identification Number:
004065035
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 64820-1 | 82340 | L3HARRIS TECHNOLOGIES, INC. | | 64820-1 | 9Y580 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1875 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.1750 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.1800 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.313 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 3.030 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.2500 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.1750 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1800 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.406 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 2 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|