|
|
|
National Stock Number:
3040-00-406-2022
Federal Supply Class:
3040
National Item Identification Number:
004062022
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 6867601 | 63005 | ROLLS-ROYCE CORPORATION | | 6867601 | 73342 | ALLISON TRANSMISSION INC | | AP6867601 | 05182 | APEX PRECISION TECHNOLOGIES, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5150 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM | | FIRST END SPLINE LENGTH | 0.620 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.6230 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.5313 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 19 | | FIRST END STYLE | SPLINED (INVOLUTE) | | FIRST END PITCH DIAMETER | 0.5938 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MS 6431 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OVERALL LENGTH | 4.588 INCHES NOMINAL | | SPECIAL FEATURES | BORE 0.360 IN. DIA 4.588 IN. LG;INTERNALLY SPLINED SECOND END,9 TEETH,0.2813 IN. PITCH DIA,0.2536 IN. MINOR DIA,0.3375 IN. MAJOR DIA,0.500 IN.PITCH,30 DEG PRESSURE ANGLE | | SECOND END DIAMETER | 0.5150 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM | | SECOND END PITCH DIAMETER | 0.5938 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.560 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.6230 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.5313 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 19 | | SECOND END STYLE | SPLINED (INVOLUTE) | | STEP QUANTITY | 2 |
|
|