|
|
|
National Stock Number:
3040-00-382-1984
Federal Supply Class:
3040
National Item Identification Number:
003821984
Description:
SHAFT ASSEMBLY,FLEXIBLE
Detail:
An item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
|
Manufacturer Information:
| 5526426 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | LD257200 | 10000 | MANEY AIRCRAFT, INC. | | LD257200ITEM5 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | LD257200PC5 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | LD257200 | 83115 | HARDMAN AIRCRAFT INC |
|
Techincal Specification:
| CASING MATERIAL | STEEL | | CASING SURFACE TREATMENT | ZINC COATED OR | | CADMIUM | | CASING LENGTH BETWEEN FERRULES | 19.215 INCHES NOMINAL | | CASING OUTSIDE DIAMETER | 0.560 INCHES MAXIMUM | | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS | | THREAD LOCATION | INTERNAL BOTH ENDS | | SCREW THREAD SERIES DESIGNATOR | UNS BOTH ENDS | | THREAD DIRECTION | RIGHT-HAND BOTH ENDS | | THREAD CLASS | 3A BOTH ENDS | | THREAD DEPTH | 0.590 INCHES NOMINAL BOTH ENDS | | END OVERALL DIAMETER | 1.300 INCHES MINIMUM AND | | 1.310 INCHES MAXIMUM BOTH ENDS | | SWIVEL END | NOT PROVIDED BOTH ENDS | | WRENCHING FACILITY TYPE | KNURLED SURFACE BOTH ENDS | | WRENCHING FACILITY OUTSIDE DIAMETER | 1.310 INCHES MINIMUM BOTH ENDS | | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS | | BEARING TYPE | SLEEVE BOTH ENDS | | CORE MATERIAL | STEEL | | CORE OVERALL LENGTH | 21.095 INCHES MINIMUM AND | | 21.135 INCHES MAXIMUM | | CORE DIAMETER | 0.250 INCHES NOMINAL | | CORE ROTATION DIRECTION | CLOCKWISE OR | | COUNTERCLOCKWISE | | END TYPE | SQUARE MALE BOTH ENDS | | TIP LENGTH | 0.840 INCHES MINIMUM AND | | 0.860 INCHES MAXIMUM BOTH ENDS | | CROSS SECTION SIZE AND LOCATION | 0.310 INCHES NOMINAL ACROSS FLATS BOTH ENDS | | SETSCREW | NOT INCLUDED BOTH ENDS | | CORE REMOVABILITY | REMOVABLE | | OVERALL LENGTH | 21.095 INCHES MINIMUM AND | | 21.135 INCHES MAXIMUM | | TORSIONAL DEFLECTION RATING | 11 DEG FT-LB IN. | | MINIMUM OPERATING RADIUS | 4.250 INCHES |
|
|