|
|
|
National Stock Number:
3040-00-364-4260
Federal Supply Class:
3040
National Item Identification Number:
003644260
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 3231576 | 55380 | HATCH & KIRK, INC. | | 3231576 | 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE DIV |
|
Techincal Specification:
| MATERIAL | STEEL COMP B1006 OR | | STEEL COMP B1010 OR | | STEEL COMP MB1006 OR | | STEEL COMP M1008 OR | | STEEL COMP M1010 OR | | STEEL COMP M1012 OR | | STEEL COMP M1015 OR | | STEEL COMP M1017 OR | | STEEL COMP M1020 OR | | STEEL COMP M1023 OR | | STEEL COMP M1025 OR | | STEEL COMP M1031 OR | | STEEL COMP M1044 OR | | STEEL COMP MB1010 OR | | STEEL COMP 1008 OR | | STEEL COMP 1010 OR | | STEEL COMP 1012 OR | | STEEL COMP 1015 OR | | STEEL COMP 1017 OR | | STEEL COMP 1020 OR | | STEEL COMP 1023 OR | | STEEL COMP 1025 OR | | STEEL COMP 1031 OR | | STEEL COMP 1006 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-630-CANCELED FED SPEC SINGLE MATERIAL RESPONSE | | STYLE DESIGNATOR | PLAIN ROUND | | OUTSIDE DIAMETER | 0.812 INCHES NOMINAL | | THICKNESS | 0.281 INCHES NOMINAL | | BORE DIAMETER | 0.4995 INCHES MINIMUM AND | | 0.5005 INCHES MAXIMUM | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED-COUNTERSUNK ALL HOLES | | HOLE DIAMETER AND LOCATION | 0.1285 INCHES NOMINAL ALL HOLES | | COUNTERSINK MAJOR DIAMETER AND LOCATION | 0.1875 INCHES NOMINAL ALL HOLES | | COUNTERSUNK HOLE ANGLE IN DEG AND LOCATION | 90.0 ALL HOLES |
|
|