|
|
|
National Stock Number:
3040-00-294-5706
Federal Supply Class:
3040
National Item Identification Number:
002945706
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 510544PC5 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | BORE DIAMETER | 0.4375 INCHES MINIMUM AND 0.4381 INCHES MAXIMUM | | CHAMFER ANGLE IN DEG | 45.0 | | LARGEST DIAMETER LENGTH | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.700 INCHES MINIMUM AND 0.710 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-637, ALLOY 462, 1/2H FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY 462 | | NOMINAL THREAD SIZE | 0.112 INCHES THREAD | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED 2ND HOLE AND UNTHREADED 2ND HOLE | | STYLE DESIGNATOR | ROUND W/SINGLE CHAMFER | | SURFACE FINISH | 125.0 MICROINCHES BOTH BEARING FLATS | | SURFACE FINISH | 125.0 MICROINCHES INSIDE PERIPHERY | | SURFACE FINISH | 125.0 MICROINCHES LARGEST OUTSIDE PERIPHERY | | SURFACE FINISH | 125.0 MICROINCHES SMALLEST OUTSIDE PERIPHERY | | TAPERED PIN SIZE ACCOMMODATED AND LOCATION | 4/0 2ND HOLE | | THICKNESS | 0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
|
|