6610-00-186-8222 LIGHTING BOX ASSEMBLY,INDICATOR Index 3040-00-186-8225 HUB,BODY

National Stock Number:
3040-00-186-8224

Federal Supply Class:
3040

National Item Identification Number:
001868224

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.


Manufacturer Information:
3500162-159364HONEYWELL INTERNATIONAL INC.
3500162-199193HONEYWELL INTERNATIONAL INC.


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END DIAMETER0.9550 INCHES MINIMUM AND 0.9650 INCHES MAXIMUM
FIRST END STYLESPLINED (STRAIGHT)
FIRST END SPLINE LENGTH0.580 INCHES MINIMUM AND 0.610 INCHES MAXIMUM
FIRST END SPLINE MAJOR DIAMETER1.0950 INCHES MINIMUM AND 1.1000 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER0.9760 INCHES MINIMUM AND 0.9860 INCHES MAXIMUM
FIRST END SPLINE QUANTITY21
LARGEST STEP DIAMETER1.117 INCHES MINIMUM AND 1.121 INCHES MAXIMUM
OVERALL LENGTH2.430 INCHES MINIMUM AND 2.440 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL
SECOND END DIAMETER1.0950 INCHES MINIMUM AND 1.1000 INCHES MAXIMUM
SECOND END SPLINE LENGTH0.570 INCHES MINIMUM AND 0.600 INCHES MAXIMUM
SECOND END SPLINE MAJOR DIAMETER1.2620 INCHES MINIMUM AND 1.2670 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER1.0850 INCHES MINIMUM AND 1.0950 INCHES MAXIMUM
SECOND END SPLINE QUANTITY24
SECOND END STYLESPLINED (STRAIGHT)
STEP QUANTITY5
SURFACE FINISH63.0 MICROINCHES


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us