| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | WEBBED, SOLID |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 110.0 MILLIMETERS AXIALLY THROUGH BODY, FIRST END |
| BORE STYLE | TAPERED BOTH ENDS |
| FACE NOMINAL WIDTH | 55.0 MILLIMETERS |
| HARDNESS RATING | 3.5 BRINELL STANDARD MINIMUM OVERALL AND 3.7 BRINELL STANDARD MAXIMUM OVERALL |
| HARDNESS RATING | 85.0 ROCKWELL SUPERFICIAL 15-N NOMINAL TEETH |
| HELIX ANGLE | 17.0000 DEGREES |
| HUB NOMINAL DIAMETER | 90.0 MILLIMETERS BOTH ENDS |
| HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| III MATERIAL | STEEL OVERALL |
| PITCH DIAMETER | 278.8 MILLIMETERS NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE NOMINAL DIAMETER | 25.0 MILLIMETERS AXIALLY THROUGH BODY, SECOND END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 8.2 MILLIMETERS AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 6 THREADED AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 6 PLAIN AXIALLY THROUGH BODY, SECOND END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF AXIALLY THROUGH BODY, FIRST END |
| NOMINAL OUTSIDE DIAMETER | 289.8 MILLIMETERS |
| STYLE DESIGNATOR | FLUSH HUB |
| TEETH QUANTITY | 63 |
| TEETH TYPE | SINGLE HELIX |
| TAPER MAJOR NOMINAL DIAMETER | 56.9 MILLIMETERS BOTH ENDS |
| TOOTH DIRECTION | RIGHT |