|
|
|
National Stock Number:
3020-01-247-2644
Federal Supply Class:
3020
National Item Identification Number:
012472644
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 196455 | 24930 | L3HARRIS TECHNOLOGIES, INC | | 196455-1 | 24930 | L3HARRIS TECHNOLOGIES, INC |
|
Techincal Specification:
| BORE STYLE | STRAIGHT SPLINE BOTH ENDS | | BORE NOMINAL DIAMETER | 0.853 INCHES BOTH ENDS | | END NOMINAL DIAMETER | 1.375 INCHES FIRST END | | END NOMINAL LENGTH | 0.190 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.370 INCHES | | FIRST STEP NOMINAL DIAMETER | 1.718 INCHES FIRST END | | FIRST STEP NOMINAL LENGTH | 0.250 INCHES FIRST END | | HUB STYLE DESIGNATOR | 1 STEP FIRST END | | III MATERIAL | STEEL CORROSION RESISTING OVERALL | | PITCH DIAMETER | 5.9259 INCHES NOMINAL | | PRESSURE ANGLE | 22.0833 DEGREES | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.440 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 6.368 INCHES | | SPLINE QUANTITY | 18 BOTH ENDS | | STYLE DESIGNATOR | PROTRUDING HUB | | TEETH QUANTITY | 24 | | TOOTH FORM | STANDARD |
|
|