| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.090 INCHES BOTH ENDS |
| FACE NOMINAL WIDTH | 0.055 INCHES |
| FIRST GROOVE NOMINAL DIAMETER | 0.232 INCHES FIRST END |
| FIRST GROOVE NOMINAL WIDTH | 0.029 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 GROOVE FIRST END |
| HUB NOMINAL DIAMETER | 0.250 INCHES FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.134 INCHES FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.225 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.600 INCHES |
| NOMINAL OVERALL LENGTH | 0.280 INCHES |
| PITCH DIAMETER | 0.5833 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 70 |
| TOOTH FORM | STANDARD |