| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| FURNISHED ITEMS AND QUANTITY | 1 DOWEL PIN |
| END NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| END NOMINAL LENGTH | 0.203 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.875 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.046 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.086 INCHES AND 0.094 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AND 2 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.694 INCHES |
| PITCH DIAMETER | 1.6666 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SPECIAL FEATURES | MTG HOLES ON HUB 90 DEG APART CENTERED 0.125 IN.FROM END |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE HUB |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY |
| SURFACE TREATMENT | ANODIZE BODY |
| SURFACE TREATMENT | ANODIZE HUB |
| TEETH QUANTITY | 120 |
| TOOTH FORM | STANDARD |