|
|
|
National Stock Number:
3020-01-103-0203
Federal Supply Class:
3020
National Item Identification Number:
011030203
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 900-0101 | 32908 | MALWIN ELECTRONICS CORP. | | 900-0101-1 | 32908 | MALWIN ELECTRONICS CORP. |
|
Techincal Specification:
| MATERIAL | ALUMINUM OVERALL | | SURFACE TREATMENT | CHROMATE OVERALL | | TEETH QUANTITY | 36 | | TOOTH FORM | STANDARD | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUBS | | PITCH DIAMETER | 0.5620 INCHES NOMINAL | | NOMINAL OUTSIDE DIAMETER | 0.594 INCHES | | FACE NOMINAL WIDTH | 0.100 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.547 INCHES FIRST END | | 0.072 INCHES SECOND END | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.120 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | PLAIN SECOND END | | HUB NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS | | CLAMPING SURFACE NOMINAL LENGTH | 0.172 INCHES FIRST END | | ATTACHMENT METHOD | CLAMP |
|
|