|
|
|
National Stock Number:
3020-01-101-4667
Federal Supply Class:
3020
National Item Identification Number:
011014667
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 530402 | 96214 | RAYTHEON COMPANY | | 530402-2 | 96214 | RAYTHEON COMPANY | | P-12-9-180-C-S-1200B | 00141 | ROLLER BEARING CO OF AMERICA, INC | | P12-180-C-S-1200 | 00141 | ROLLER BEARING CO OF AMERICA, INC |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 BODY | | STEEL COMP 303 HUB | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE BODY | | 66,SAE 30303 FED STD SINGLE MATERIAL RESPONSE HUB | | SURFACE TREATMENT | ANODIZE BODY | | PASSIVATE HUB | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,T2 MIL SPEC SINGLE TREATMENT RESPONSE BODY | | MIL-STD-171,FINISH NO. 5.4.1. MIL STD SINGLE TREATMENT RESPONSE HUB | | TEETH QUANTITY | 180 | | TOOTH FORM | STANDARD | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | PITCH DIAMETER | 1.4990 INCHES MINIMUM AND | | 1.5000 INCHES MAXIMUM | | NOMINAL OUTSIDE DIAMETER | 1.5160 INCHES | | FACE NOMINAL WIDTH | 0.104 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | HUB NOMINAL DIAMETER | 0.188 INCHES FIRST END | | CLAMPING SURFACE NOMINAL LENGTH | 0.250 INCHES FIRST END | | ATTACHMENT METHOD | CLAMP |
|
|