|
|
|
National Stock Number:
3020-01-013-9987
Federal Supply Class:
3020
National Item Identification Number:
010139987
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| AP96N185 | 29440 | W. M. BERG INC |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 BODY | | STEEL COMP 303 HUB | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE BODY | | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE HUB | | SURFACE TREATMENT | ANODIZE BODY | | PASSIVATE HUB | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY | | TEETH QUANTITY | 185 | | TOOTH FORM | STANDARD | | PRESSURE ANGLE | 20.0000 DEGREES | | PRECISION CLASSIFICATION | QUALITY NUMBER 10 | | STYLE DESIGNATOR | PROTRUDING HUBS | | PITCH DIAMETER | 1.9270 INCHES NOMINAL | | NOMINAL OUTSIDE DIAMETER | 1.948 INCHES | | FACE NOMINAL WIDTH | 0.104 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.256 INCHES FIRST END | | 0.046 INCHES SECOND END | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | 1 STEP FIRST END | | PLAIN SECOND END | | HUB NOMINAL DIAMETER | 0.687 INCHES SECOND END | | END NOMINAL LENGTH | 0.210 INCHES FIRST END | | END NOMINAL DIAMETER | 0.312 INCHES FIRST END | | FIRST STEP NOMINAL LENGTH | 0.046 INCHES FIRST END | | FIRST STEP NOMINAL DIAMETER | 0.687 INCHES FIRST END |
|
|