|
|
|
National Stock Number:
3020-00-970-9095
Federal Supply Class:
3020
National Item Identification Number:
009709095
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 102648 | 24930 | L3HARRIS TECHNOLOGIES, INC |
|
Techincal Specification:
| MATERIAL | ALUMINUM FIRST GEAR | | STEEL CORROSION RESISTING HUB | | ALUMINUM SECOND GEAR | | STEEL CORROSION RESISTING SPRING | | SURFACE TREATMENT | ANODIZE FIRST GEAR | | PASSIVATE HUB | | ANODIZE SECOND GEAR | | TEETH QUANTITY | 96 | | TOOTH FORM | STANDARD | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | PITCH DIAMETER | 2.0000 INCHES NOMINAL | | NOMINAL OUTSIDE DIAMETER | 2.0416 INCHES | | FACE NOMINAL WIDTH | 0.125 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.313 INCHES FIRST END | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | HUB NOMINAL DIAMETER | 0.250 INCHES FIRST END | | CLAMPING SURFACE NOMINAL LENGTH | 0.188 INCHES FIRST END | | ATTACHMENT METHOD | CLAMP |
|
|