| MATERIAL | STEEL COMP 303S OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COMP 303S MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| HARDNESS RATING | 75.0 ROCKWELL B MINIMUM AND |
| 83.0 ROCKWELL C MAXIMUM OVERALL |
| TEETH QUANTITY | 120 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PERIPHERAL FACE, HUBLESS |
| PITCH DIAMETER | 2.5000 INCHES NOMINAL |
| NOMINAL OVERALL LENGTH | 0.609 INCHES |
| NOMINAL OUTSIDE DIAMETER | 2.5410 INCHES |
| FACE NOMINAL WIDTH | 0.104 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| 0.224 INCHES SECOND END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| PLAIN SECOND END |
| HUB NOMINAL DIAMETER | 0.625 INCHES FIRST END |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AND |
| 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.062 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 40 TRANSVERSELY THROUGH HUB, FIRST END |