| MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| TEETH QUANTITY | 54 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| PITCH DIAMETER | 0.7500 INCHES NOMINAL |
| NOMINAL OVERALL LENGTH | 0.343 INCHES |
| NOMINAL OUTSIDE DIAMETER | 0.777 INCHES |
| FACE NOMINAL WIDTH | 0.062 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.156 INCHES FIRST END |
| 0.125 INCHES SECOND END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.090 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | 1 GROOVE FIRST END |
| PLAIN SECOND END |
| HUB NOMINAL DIAMETER | 0.218 INCHES BOTH ENDS |
| FIRST GROOVE NOMINAL WIDTH | 0.018 INCHES FIRST END |
| FIRST GROOVE NOMINAL DIAMETER | 0.205 INCHES FIRST END |
| NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.040 INCHES FIRST END |
| BODY STYLE | PLAIN, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 13499 |
| DESIGN CONTROL REFERENCE | 554-8754-003 |