| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| TEETH QUANTITY | 88 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| STYLE DESIGNATOR | PROTRUDING HUB |
| PITCH DIAMETER | 0.9167 INCHES NOMINAL |
| NOMINAL OVERALL LENGTH | 0.281 INCHES |
| NOMINAL OUTSIDE DIAMETER | 0.937 INCHES |
| FACE NOMINAL WIDTH | 0.093 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.188 INCHES FIRST END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| HUB NOMINAL DIAMETER | 0.255 INCHES FIRST END |
| BODY STYLE | PLAIN, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AND |
| 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.052 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 89954 |
| DESIGN CONTROL REFERENCE | 701C921P1 |