| MATERIAL | STEEL COMP 303S OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OR |
| OXIDE OVERALL |
| TEETH QUANTITY | 110 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| STYLE DESIGNATOR | PROTRUDING HUB |
| PITCH RADIUS | 0.45835 INCHES NOMINAL |
| NOMINAL OVERALL LENGTH | 0.250 INCHES |
| FACE NOMINAL WIDTH | 0.090 INCHES |
| NOMINAL OUTSIDE RADIUS | 0.4663 INCHES |
| ARC NOMINAL LENGTH | 0.4950 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.1600 INCHES FIRST END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.124 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| HUB NOMINAL DIAMETER | 0.2550 INCHES FIRST END |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED AND |
| 2 PLAIN TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.052 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 89954 |
| DESIGN CONTROL REFERENCE | 701C901P1 |