| BORE NOMINAL DIAMETER | 0.730 INCHES FIRST END |
| BORE STYLE | INVOLUTE SPLINE SECOND END |
| BORE STYLE | PARTIAL FIRST END |
| END NOMINAL DIAMETER | 0.938 INCHES SECOND END |
| END NOMINAL LENGTH | 0.355 INCHES SECOND END |
| FACE NOMINAL WIDTH | 0.500 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.985 INCHES SECOND END |
| FIRST STEP NOMINAL LENGTH | 1.535 INCHES SECOND END |
| HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND 63.0 ROCKWELL C MAXIMUM BODY |
| HARDNESS RATING | 60.0 ROCKWELL C MINIMUM TEETH |
| HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 1031 OVERALL |
| PITCH ANGLE | 34.8833 DEGREES |
| PITCH DIAMETER | 2.1140 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.890 INCHES SECOND END |
| NOMINAL OVERALL LENGTH | 2.880 INCHES |
| NOMINAL OUTSIDE DIAMETER | 2.271 INCHES |
| SPECIAL FEATURES | HUB END IS THREADED,0.938-20 UNEF-3A,AND HAS TWO AXIAL SLOTS DIAMETRICALLY OPPOSITE FROM EACH OTHER |
| SPLINE PITCH DIAMETER | 0.6000 INCHES NOMINAL SECOND END |
| SPLINE QUANTITY | 12 SECOND END |
| STYLE DESIGNATOR | SIDE FACE, BACK HUB PROTRUDING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2406 ASSN STD 1ST TREATMENT RESPONSE AND AMS 2485 ASSN STD 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CHROMIUM AND OXIDE OVERALL |
| TEETH QUANTITY | 23 |
| TEETH TYPE | SPIRAL |
| TOOTH DIRECTION | RIGHT |
| BORE NOMINAL DEPTH | 1.130 INCHES FIRST END |
| BODY STYLE | PLAIN, SOLID |
| BODY RECESS NOMINAL DEPTH | 0.438 INCHES FIRST END |