|
|
|
National Stock Number:
3020-00-875-6364
Federal Supply Class:
3020
National Item Identification Number:
008756364
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 10067942 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| BORE NOMINAL DIAMETER | 0.938 INCHES BOTH ENDS | | BORE STYLE | PLAIN BOTH ENDS | | FACE NOMINAL WIDTH | 0.250 INCHES | | HUB NOMINAL DIAMETER | 1.250 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | PINNED FIRST END | | HUB STYLE DESIGNATOR | PLAIN SECOND END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND T FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 416 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.438 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.563 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 9.563 INCHES | | PITCH DIAMETER | 9.5000 INCHES NOMINAL | | PRESSURE ANGLE | 14.5000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUBS | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEETH QUANTITY | 456 | | TOOTH FORM | STANDARD |
|
|