| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| HELIX ANGLE | 23.5590 DEGREES |
| HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| PITCH DIAMETER | 2.2117 INCHES MINIMUM AND 2.2127 INCHES MAXIMUM |
| PRESSURE ANGLE | 20.0000 DEGREES |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 2.300 INCHES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 150 |
| TEETH TYPE | SINGLE HELIX |
| TOOTH DIRECTION | LEFT |
| TOOTH FORM | STANDARD |