|
|
|
National Stock Number:
3020-00-810-6741
Federal Supply Class:
3020
National Item Identification Number:
008106741
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 9056039 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | ALUMINUM FIRST GEAR | | STEEL CORROSION RESISTING HUB | | ALUMINUM SECOND GEAR | | STEEL CORROSION RESISTING SPRING | | SURFACE TREATMENT | ANODIZE FIRST GEAR | | PASSIVATE HUB | | ANODIZE SECOND GEAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE FIRST GEAR | | MIL-A-8625,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SECOND GEAR | | TEETH QUANTITY | 125 | | TOOTH FORM | STANDARD | | PRESSURE ANGLE | 20.0000 DEGREES | | PRECISION CLASSIFICATION | QUALITY NUMBER 10 | | BACKLASH DESIGNATION | GRADE C | | STYLE DESIGNATOR | PROTRUDING HUB | | PITCH DIAMETER | 1.9531 INCHES NOMINAL | | NOMINAL OUTSIDE DIAMETER | 1.983 INCHES | | FACE NOMINAL WIDTH | 0.125 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES FIRST END | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.241 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | PINNED FIRST END | | HUB NOMINAL DIAMETER | 0.563 INCHES FIRST END | | SPECIAL FEATURES | HUB INCLUDES DRIVE SLOT |
|
|