| MATERIAL | ALUMINUM OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-267,TY 24ST FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| TEETH QUANTITY | 44 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR |
| QUALITY NUMBER 11 |
| STYLE DESIGNATOR | PROTRUDING HUB, RECESSED BODY |
| PITCH DIAMETER | 0.6865 INCHES MINIMUM AND |
| 0.6875 INCHES MAXIMUM |
| NOMINAL OVERALL LENGTH | 0.375 INCHES |
| NOMINAL OUTSIDE DIAMETER | 0.718 INCHES |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.120 INCHES FIRST END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| BODY STYLE | WEBBED, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 32 TRANSVERSELY THROUGH HUB, FIRST END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 94033 |
| DESIGN CONTROL REFERENCE | 530C65-27 |