| MATERIAL | STEEL COMP 303 AND |
| STEEL COMP 303SE OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COMP 303 S MIL SPEC SINGLE MATERIAL RESPONSE AND |
| MIL-S-7720,COMP 303SE MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| THREAD FORM QUANTITY | 1 |
| THREAD FORM DIRECTION | RIGHT-HAND |
| PRESSURE ANGLE | 20.0000 DEGREES |
| HELIX ANGLE | 3.5833 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| PITCH DIAMETER | 0.3333 INCHES NOMINAL |
| NOMINAL OVERALL LENGTH | 0.625 INCHES |
| NOMINAL OUTSIDE DIAMETER | 0.375 INCHES |
| FACE NOMINAL WIDTH | 0.438 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 40 TRANSVERSELY THROUGH HUB, FIRST END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 01351 |
| DESIGN CONTROL REFERENCE | SWS4 |