|
|
|
National Stock Number:
3020-00-580-4141
Federal Supply Class:
3020
National Item Identification Number:
005804141
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 42681 | 50027 | UNDERSEA SENSOR SYSTEMS INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 303 OR | | STEEL COMP 303SE OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COND A MIL SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEETH QUANTITY | 100 | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | PITCH DIAMETER | 0.8333 INCHES NOMINAL | | NOMINAL OVERALL LENGTH | 0.281 INCHES | | NOMINAL OUTSIDE DIAMETER | 0.849 INCHES | | FACE NOMINAL WIDTH | 0.094 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.091 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | PINNED FIRST END | | HUB NOMINAL DIAMETER | 0.249 INCHES FIRST END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 50027 | | DESIGN CONTROL REFERENCE | 42681 |
|
|