| MATERIAL | STEEL COMP 1022 OR |
| STEEL COMP 8620 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-20166 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| FACE TYPE | STRAIGHT |
| THREAD FORM QUANTITY | 1 |
| THREAD FORM DIRECTION | RIGHT-HAND |
| PRESSURE ANGLE | 14.5000 DEGREES |
| HELIX ANGLE | 3.6123 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| PITCH DIAMETER | 0.9650 INCHES NOMINAL |
| NOMINAL OUTSIDE DIAMETER | 1.0900 INCHES |
| FACE NOMINAL WIDTH | 0.750 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.719 INCHES FIRST END |
| 0.3440 INCHES SECOND END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.375 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | 1 GROOVE FIRST END |
| PLAIN SECOND END |
| HUB NOMINAL DIAMETER | 1.000 INCHES FIRST END |
| 0.812 INCHES SECOND END |
| FIRST GROOVE NOMINAL WIDTH | 0.219 INCHES FIRST END |
| FIRST GROOVE NOMINAL DIAMETER | 0.812 INCHES FIRST END |
| NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.500 INCHES FIRST END |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, SECOND END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, SECOND END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.250 INCHES TRANSVERSELY THROUGH HUB, SECOND END |