| BODY STYLE | PLAIN, SOLIDPLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS0.250 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDSPLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.312 INCHES0.312 INCHES |
| FURNISHED ITEMS AND QUANTITY | 1 EXTERNALLY LUBRICATED BEARING1 EXTERNALLY LUBRICATED BEARING |
| HELIX ANGLE | 45.0000 DEGREES45.0000 DEGREES |
| HUB NOMINAL DIAMETER | 0.562 INCHES FIRST END0.562 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.498 INCHES SECOND END0.498 INCHES SECOND END |
| HUB STYLE DESIGNATOR | PINNED FIRST ENDPINNED FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND ENDPLAIN SECOND END |
| MATERIAL | PLASTIC PHENOLIC BODYPLASTIC PHENOLIC BODY |
| MATERIAL | PLASTIC PHENOLIC TEETHPLASTIC PHENOLIC TEETH |
| MATERIAL | STEEL HUBSTEEL HUB |
| PITCH DIAMETER | 1.6640 INCHES MINIMUM AND 1.6640 INCHES MINIMUM AND 1.6660 INCHES MAXIMUM1.6660 INCHES MAXIMUM |
| PRESSURE ANGLE | 14.5000 DEGREES14.5000 DEGREES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.359 INCHES BOTH ENDS0.359 INCHES BOTH ENDS |
| NOMINAL OUTSIDE DIAMETER | 1.723 INCHES1.723 INCHES |
| SPECIAL FEATURES | MTG HOLES 120 DEGS APARTMTG HOLES 120 DEGS APART |
| STYLE DESIGNATOR | PROTRUDING HUBSPROTRUDING HUBS |
| SURFACE TREATMENT | PHOSPHATE HUBPHOSPHATE HUB |
| TEETH QUANTITY | 4040 |
| TEETH TYPE | SINGLE HELIXSINGLE HELIX |
| TOOTH DIRECTION | LEFTLEFT |
| TOOTH FORM | STANDARDSTANDARD |